Suzuki Grand Vitara SQ416/SQ420/420WD
Since 1998 of release
Repair and car operation
Suzuka Grandee Vitara
- The general information
+ Safety measures
The basic safety measures
Safety measures at work with the catalyst
Safety measures at service of electric chains
+ Procedure of check of electric chains
Interrupting or weak connection
Safety measures at installation of means of a mobile communication
+ The identification information
Warning, warning and information labels
Places of lifting of the car
The list of the reductions used in the given management
+ The metric information
The standard moments of inhalings
+ Maintenance service and greasing
+ Heater, ventilation and the conditioner
+ Suspension bracket
+ Wheels and tyres
+ Forward приводной a shaft shaft/bearing. An oil epiploon
+ Kardannye shaft
+ Brake system
+ Fuel system
+ Ignition system
+ Start system
+ Release system
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. An immobilizer
+ Electric equipment
The basic safety measures
Following preventions and cautions describe the basic safety measures which are necessary for observing at car service.
These safety measures are applicable to the majority of service operations described in the given management, and, it is not obligatory that they will repeat in each operation where they should be observed.
At a car raising necessarily follow the instructions described in subsection of the Place of lifting of the car in the Head the General information. When for carrying out of service works it is necessary that the engine worked, make sure that the manual brake and a transmission is active is in neutral position for cars with МКПП and in position «P» for cars with АКПП. Hold hands, hair, clothes, the tool etc. far away from fans and belts at the working engine.
If it is necessary that the engine worked indoors, make sure that the extract for exhaust gases works.
Do not perform service works in places where flammable materials can have contact to hot final system. At work with toxic and легковоспламеняемыми materials (such as gasoline and a coolant), provide good ventilation of a workplace.
To avoid burns, steer clear of hot metal details, such as a radiator, a final collector, an exhaust pipe, the muffler etc.
The new and fulfilled engine oil can be dangerous. Children and pets can suffer, if take a sip the new or fulfilled oil. Store the new both fulfilled oil and oil filters far away from children and pets. At long contact to the fulfilled oil the skin cancer at laboratory animals has been revealed. Short-term contact to the fulfilled oil can cause irritation of a skin. To reduce irritating influence from contact to the fulfilled oil put on the uniform with long sleeves and water-proof gloves (such, as for ware washing) at engine oil replacement. At contact of engine oil to a skin, carefully wash out water with soap. Erase all clothes and rags on which oil has got, reuse or correctly utilise the fulfilled oil and filters.
Check up that the cowl is completely closed and will latch before a trip. If is not present, it can unexpectedly open during driving, complicating the review that can lead to failure.
Check up that all used spare parts ideally pure.
At lubricant or hermetic use, check up that it of the specified type.
Use special tools there where it is necessary.
The special adaptation
At work with the cars equipped инжекторной with fuel system, never separate a contour between the fuel pump and an injector without preliminary dump of pressure since fuel can scatter under pressure.