Suzuki Grand Vitara SQ416/SQ420/420WD

Since 1998 of release

Repair and car operation



Suzuka Grandee Vitara
+ The general information
+ Maintenance service and greasing
+ Heater, ventilation and the conditioner
+ Steering
+ Suspension bracket
+ Wheels and tyres
+ Forward приводной a shaft shaft/bearing. An oil epiploon
+ Kardannye shaft
+ Brake system
+ Engines
+ Fuel system
+ Ignition system
+ Start system
+ Release system
- Transmissions
   + Mechanical transmission (type 1)
   + Mechanical transmission (type 2)
   - Automatic transmission (4 A/T)
      + The general description
      + Diagnostics of an automatic transmission
      - Safety measures at diagnostics of malfunctions
         The table of diagnostics of an automatic transmission
         Lamp check "Off on demand"
         Check of a lamp "Food"
         The table of codes of diagnostics of malfunctions (DTC) (the Code of automatic transmission)
         The uninterrupted operation table
      + Visual survey
      + Service out of a workshop
      + System of blocking of brakes
      + System check
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. An immobilizer
+ Electric equipment







e8f2b5b1

The table of codes of diagnostics of malfunctions (DTC) (the Code of automatic transmission)

Number of a code of malfunction (DTC)

The found out malfunction

With the scanning tool

Without the scanning tool

12

Р0705

72

Malfunction of the scheme of the gauge of position of transfer

Р0715

76

Malfunction of the scheme of the gauge of speed of a leading shaft/turbine

Р0720

75

Malfunction of the scheme of the gauge of speed on an exit

*1

Р0741

It is not applied

Work or jamming of solenoid TSS (blocking)

Р0743

65

66

Electric solenoid TSS (blocking)

*1

Р0751

It is not applied

Work or jamming of the solenoid of switching (№1)

Р0753

61

62

The electric solenoid of switching (№1)

*1

Р0756

Not a comment

Work or jamming of the solenoid of switching-in (№2)

Р0758

63

64

The electric solenoid of switching-in (№2)

*1

Р1875

It is not applied

Malfunction of the scheme of the bottom switch of a full drive


Defined condition

The malfunction indicator

The car without a socket for the monitor

The car with a socket for the monitor

Problems are not present

Simultaneously on an input many signals or not a signal move at movement for the speed of 60 km/h or more.

2 motion cycles

It is not applied

Speed of rotation of a leading shaft below the specified value at movement of the car with transfer to position “D” and the specified speed of the engine or above.

2 motion cycles

1 motion cycle

The signal of the gauge of speed on an exit does not arrive, though the signal of speed of the car arrives.

2 motion cycles

1 motion cycle

Real work ТСС will not be co-ordinated with function management INCL. / off, going from the electronic control block to ТСС.

2 motion cycles

It is not applied

On the monitor the signal OFF when the solenoid of management ТСС is included is defined, or on the monitor the signal is defined INCL. when it is switched off.

1 motion cycle

1 motion cycle

The management of a gear change going from the electronic block of management (РСМ) to an automatic transmission (А/Т), will not be co-ordinated with real position of transfer of an automatic transmission.

2 motion cycles

It is not applied

On the monitor the signal OFF when the solenoid of switching (№1) is included is defined, or on the monitor the signal is defined INCL. when it is switched off.

1 motion cycle

1 motion cycle

The management of a gear change going from the electronic block of management (РСМ) to an automatic transmission (А/Т), will not be co-ordinated with real position of transfer of an automatic transmission.

2 motion cycles

It is not applied

On the monitor the signal OFF when the solenoid of switching-in (№2) is included is defined, or on the monitor the signal is defined INCL. when it is switched off.

1 motion cycle

1 motion cycle

Difference between the speed of the car defined by the gauge of speed of the car (VSS), and the speed of the car defined by the gauge of speed on an exit and compensated by the bottom switch of a full drive, more specified in the specification.

2 motion cycles

It is not applied

*1: It is applied only on the car without a socket to the monitor.