Suzuki Grand Vitara SQ416/SQ420/420WD

Since 1998 of release

Repair and car operation



Suzuka Grandee Vitara
+ The general information
+ Maintenance service and greasing
+ Heater, ventilation and the conditioner
+ Steering
+ Suspension bracket
+ Wheels and tyres
+ Forward приводной a shaft shaft/bearing. An oil epiploon
+ Kardannye shaft
+ Brake system
+ Engines
+ Fuel system
- Ignition system
   + System of ignition for engine G16
   - System of ignition for engine J20
      + The general description
      + Diagnostics
      - Vehicle service
         Check and adjustment of time of an advancing of ignition
         Assemblage of the coil of ignition (an igniter and the ignition coil)
         Spark plug
         CMP-sensor control
         Шумоподавитель
      The specification, inhaling twisting moment
      The special tool
+ Start system
+ Release system
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. An immobilizer
+ Electric equipment
e8f2b5b1



Spark plug

Removal

 PERFORMANCE ORDER

  1. Disconnect муфту ignition coils.
  2. Remove a bolt of the coil of ignition (1), and then extend assemblage of the coil of ignition (2).
  3. Remove a spark plug (3).
Engine J20.

Survey

At service iridievyh / platinum spark plugs (type of candles with a thin central electrode), do not touch the central electrode not to damage it. An electrode not strong enough to sustain mechanical effort, and its material also mechanically not so strong.


 PERFORMANCE ORDER

  1. Check up them on deterioration of electrodes, carbon adjournment, it is damaged
    ие isolation.
  1. If any malfunction is found out, adjust an air backlash, clear a special cleaner for свеч ignitions or replace them with new candles as it is specified.
    • Air backlash of a spark plug "a": 1.0-1.1 mm (0.039 - 0.043 inches)
    • Spark plug type: DENSO K20PR - U11/SK16PR11, NGK BKR6E-11/*IFR5J11

At temperature more low - 25 C (-13F), it is recommended to use candles with a sign (*) for the best work of the engine.

Installation

 PERFORMANCE ORDER

  1. Establish a candle () ignitions (3) and tighten them according to the specified twisting moment of an inhaling. An inhaling twisting moment: a candle () ignitions: 25 Н•м (2.5 kg th, 18.0 pounds-foots).
  2. Establish assemblage of the coil of ignition (2) reliably.
  3. Tighten a bolt of the coil of ignition (1), and then connect муфту ignition coils.
Engine J20.