Suzuka Grandee Vitara
- The general information
+ Safety measures
The basic safety measures
Safety measures at work with the catalyst
Safety measures at service of electric chains
+ Procedure of check of electric chains
Interrupting or weak connection
Safety measures at installation of means of a mobile communication
+ The identification information
Warning, warning and information labels
Places of lifting of the car
The list of the reductions used in the given management
+ The metric information
The standard moments of inhalings
+ Maintenance service and greasing
+ Heater, ventilation and the conditioner
+ Steering
+ Suspension bracket
+ Wheels and tyres
+ Forward приводной a shaft shaft/bearing. An oil epiploon
+ Kardannye shaft
+ Brake system
+ Engines
+ Fuel system
+ Ignition system
+ Start system
+ Release system
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. An immobilizer
+ Electric equipment
|
The standard moments of inhalings
Each bolt should be tightened according to the moment specified in each section of this management. If to such information it is not presented, use the following table of the applicable moments of an inhaling, for each bolt. At bolt use, stronger, than original, seize the moment specified for the original.
|
|
For фланцевых bolts, фланцевых nuts and самоконтрящихся durability nuts 4T and 7T add 10 % by the time of an inhaling, specified in the table more low. The table is applicable only for легкосплавных or steel connectors.
|
The table of the moments of an inhaling
|
Durability class |
Diameter of a carving (nominal diameter) (mm) |
| 4 |
5 |
6 |
8 |
10 |
| Bolts durabilities equivalent to a class 4T |
Н•м |
1.5 |
3.0 |
5.5 |
13 |
29 |
|
|
Kg th |
0.15 |
0.30 |
0.55 |
1.3 |
2.9 |
| Pounds-foots |
1.0 |
2.5 |
4.0 |
9.5 |
21.0 |
| Bolts durabilities equivalent to a class 6.8 |
Н•м |
2.4 |
4.7 |
8.4 |
20 |
42 |
|
|
Kg th |
0.24 |
0.47 |
0.84 |
2.0 |
4.2 |
| Pounds-foots |
2.0 |
3.5 |
6.0 |
14.5 |
30.5 |
| Bolts durabilities equivalent to a class 6.8 with a flange |
Н•м |
2.4 |
4.9 |
8.8 |
21 |
44 |
|
|
Kg th |
0.24 |
0.49 |
0.88 |
2.1 |
4.4 |
| Pounds-foots |
2.0 |
3.5 |
6.5 |
15.5 |
32.0 |
| Bolts durabilities equivalent to a class 7T |
Н•м |
2.3 |
4.5 |
10 |
23 |
50 |
|
|
Kg th |
0.23 |
0.45 |
1.0 |
2.3 |
5.0 |
| Pounds-foots |
2.0 |
3.5 |
7.5 |
17.0 |
36.5 |
| Bolts durabilities equivalent to a class 8.8 without a flange |
Н•м |
2.5 |
6.3 |
11 |
27 |
56 |
|
|
Kg th |
0.31 |
0.63 |
1.1 |
2.7 |
5.6 |
| Pounds-foots |
2.5 |
4.5 |
8.0 |
19.5 |
40.5 |
| Bolts durabilities equivalent to a class 8.8 with a flange |
Н•м |
3.2 |
6.5 |
12 |
29 |
59 |
|
|
Kg th |
0.32 |
0.65 |
1.2 |
2.9 |
5.9 |
| Pounds-foots |
2.5 |
5.0 |
9.0 |
21.0 |
43.0 |
| Durability class |
Diameter of a carving (nominal diameter) (mm) |
| 12 |
14 |
16 |
18 |
| Bolts durabilities equivalent to a class 4T |
Н•м |
45 |
65 |
105 |
160 |
|
|
Kg th |
4.5 |
6.5 |
10.5 |
16 |
| Pounds-foots |
32.5 |
47.5 |
76.0 |
116.0 |
| Bolts durabilities equivalent to a class 6.8 |
Н•м |
80 |
125 |
193 |
280 |
|
|
Kg th |
8.0 |
12.5 |
19.3 |
28 |
| Pounds-foots |
58.0 |
90.5 |
139.5 |
202.5 |
| Bolts durabilities equivalent to a class 6.8 with a flange |
Н•м |
84 |
133 |
263 |
298 |
|
|
Kg th |
8.4 |
13.3 |
20.3 |
29.8 |
| Pounds-foots |
61.0 |
96.5 |
147.0 |
215.5 |
| Bolts durabilities equivalent to a class 7T |
Н•м |
85 |
135 |
210 |
240 |
|
|
Kg th |
8.5 |
13.5 |
21 |
24 |
| Pounds-foots |
61.5 |
98.0 |
152.0 |
174.0 |
| Bolts durabilities equivalent to a class 8.8 without a flange |
Н•м |
105 |
168 |
258 |
373 |
|
|
Kg th |
10.5 |
16.5 |
25.8 |
37.3 |
| Pounds-foots |
76.0 |
121.5 |
187.0 |
270.0 |
| Bolts durabilities equivalent to a class 8.8 with a flange |
Н•м |
113 |
175 |
270 |
395 |
|
|
Kg th |
11.3 |
17.5 |
27 |
39.5 |
| Pounds-foots |
82.0 |
126.5 |
195.5 |
286.0 |
* Самоконтрящаяся a nut
|
|
