Suzuki Grand Vitara SQ416/SQ420/420WD

Since 1998 of release

Repair and car operation

Suzuka Grandee Vitara
+ The general information
+ Maintenance service and greasing
+ Heater, ventilation and the conditioner
+ Steering
+ Suspension bracket
- Wheels and tyres
   + The general description
   + Diagnostics
   - Servicing and small adjustment
      - Wheel and the tyre
         The combined tyres and wheels (for the car with steel wheels)
         Inflating of tyres
         The table on tyres
         Mutual shift of tyres
   + Service out of a workshop
+ Forward приводной a shaft shaft/bearing. An oil epiploon
+ Kardannye shaft
+ Brake system
+ Engines
+ Fuel system
+ Ignition system
+ Start system
+ Release system
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. An immobilizer
+ Electric equipment


The combined tyres and wheels (for the car with steel wheels)

Tyres and wheels are combined in the conditions of industrial assemblage. It means that radially the most rigid part of the tyre, or «an acting place», is combined with the least radius, or «the deepest place» wheels. It becomes for maintenance of the most smooth course.

«The acting place» tyres usually is marked by a put paint a point (1) on an external lateral wall. In due course this point (1) is washed off from the tyre.

«The deepest place» wheels is initially marked by a put paint a point (2) on закраине wheel rims. At correct assemblage the point on a rim of a wheel (2) is combined with a point on the tyre (1).

If the tyre acts in film from a wheel at its installation into place it should be combined with a wheel correctly. If the point (1) on the tyre is not present, before tyre removal it is necessary to scratch labels on the tyre and a wheel that at installation to combine them and to collect a wheel in a starting position.