Suzuki Grand Vitara SQ416/SQ420/420WD

Since 1998 of release

Repair and car operation


Suzuka Grandee Vitara
+ The general information
+ Maintenance service and greasing
+ Heater, ventilation and the conditioner
+ Steering
+ Suspension bracket
+ Wheels and tyres
+ Forward приводной a shaft shaft/bearing. An oil epiploon
+ Kardannye shaft
+ Brake system
- Engines
   + Mechanical part of engine G16
   + Mechanical part of engine J20
   - Engine cooling
      + The general description
      + Diagnostics
      + Maintenance service
      - Vehicle routine maintenance
         Plums of a cooling liquid
         Hoses or water pipes of system of cooling
         The thermostat
         Belt of the cooling fan
         The cooling fan and муфта the fan
         Radiator
         The water pump
         The gauge of temperature of a cooling liquid of the engine (EATS)
      Necessary service materials
      Technical characteristics of the rotating moment of an inhaling
+ Fuel system
+ Ignition system
+ Start system
+ Release system
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. An immobilizer
+ Electric equipment






Strifor всегда платит по материалам www.boss-nadzor.ru. | strifor biz, mary | Назначение на должность председателя центрального банка рф e8f2b5b1

Belt of the cooling fan

Removal

For engines G16

 PERFORMANCE ORDER

  1. Disconnect a negative cable (-) from the accumulator.
  2. Turn off an adjusting bolt приводного a belt of pump P/S and then remove pump P/S belt.
  1. Turn off an adjusting bolt (1) and шарнирный a bolt.
  1. Ослабьте a belt, having displaced the generator, and then remove it.

For engine J20

 PERFORMANCE ORDER

  1. Disconnect a negative cable (-) from the accumulator.
  1. Untwist an adjusting bolt (1) and шарнирный a bolt (2).
  1. Ослабьте a belt, having displaced a fan pulley.
  2. Remove cooling pump. Simply disconnect the fan/muftu from a fan pulley.
  3. Remove a belt of the cooling fan (3).

Installation

For engines G16

 PERFORMANCE ORDER

  1. Establish a belt on a pulley of the water pump, a pulley коленвала and a generator pulley. Establish приводной pump P/S belt.
  2. Adjust a belt tension as it is specified. Address to Section Regulation and check of a tension of a belt of the cooling fan in this Chapter.
  3. Twirl an adjusting bolt and шарнирный a bolt.
  4. Connect a negative cable (-) to the accumulator.

For engine J20

 PERFORMANCE ORDER

  1. Establish a belt to a pulley of the fan and a pulley коленвала.
  2. Establish cooling fan. Address to Razdelu Mufta of the fan of cooling system in this Chapter.
  3. Adjust a belt tension as it is specified. Address to Section Regulation and check of a tension of a belt of the cooling fan in this Chapter.
  4. Twirl an adjusting bolt and шарнирный a bolt.
  5. Connect a negative cable (-) to the accumulator.

Check of a tension of a belt of the cooling fan

Examine a belt and check up a belt tension. Address to Section Regulation and check of a tension of a belt of the cooling fan in this Chapter.