Suzuki Grand Vitara SQ416/SQ420/420WD

Since 1998 of release

Repair and car operation



Suzuka Grandee Vitara
+ The general information
+ Maintenance service and greasing
+ Heater, ventilation and the conditioner
+ Steering
+ Suspension bracket
+ Wheels and tyres
+ Forward приводной a shaft shaft/bearing. An oil epiploon
+ Kardannye shaft
+ Brake system
+ Engines
+ Fuel system
+ Ignition system
- Start system
   + The general description
   - Diagnostics
      Block repair
      Analysis
      Assemblage
      Survey
      Work check
      Specifications
      Type 0.9 кВ
   Necessary materials
   The special tool
+ Release system
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. An immobilizer
+ Electric equipment







e8f2b5b1

Work check

Each check should be carried out within 3-5 seconds that the coil has not fused.

Retraction check

 PERFORMANCE ORDER

  1. Connect the battery to the electromagnetic switch as shown more low.
  2. Check up that the piston and a gear come to light.
  3. If the piston and a gear do not move, replace the electromagnetic switch.

Before check, disconnect a wire wire from conclusion M.


1 — a conclusion ' S'
2 — a conclusion ' M'
3 — a wire conclusion (the switch on the motor)
4 — a conclusion ' In'

Keeping check

 PERFORMANCE ORDER

  1. At connection as it is specified above with the put forward piston, disconnect a negative wire from a conclusion ' M '.
  1. Check up that the piston and a gear remain outside.
  2. If the piston and a gear come back back, replace the electromagnetic switch.

Check of return of the piston and gear

Disconnect a negative wire conclusion from the switch case. Check up that the piston and a gear come back inside. If the piston and a gear do not come back, disassemble and check up a starter.

Check of work without loading

 PERFORMANCE ORDER

  1. Connect the battery and the ampermeter to a starter as shown.
  1. Check up that the starter rotates smoothly and constantly, and the gear moves outside. Check up that the ampermeter shows a current, as указанно. The specified current: 90 A MAX. At 11 Century

Use thicker wires and completely tighten each conclusion.