Suzuka Grandee Vitara
+ The general information
+ Maintenance service and greasing
+ Heater, ventilation and the conditioner
+ Steering
- Suspension bracket
- Forward suspension bracket
The general description
+ Diagnostics
- Service out of a workshop
The stabilizer of cross-section stability/plug
Shock-absorber rack
Cylindrical spring
The terminator of a dynamic course of a suspension bracket / a rubber nest of a spring
Wheel nave (including the wheel bearing)
Sharnir/os rotations
The suspension bracket/plug lever
+ Back suspension bracket
+ Wheels and tyres
+ Forward приводной a shaft shaft/bearing. An oil epiploon
+ Kardannye shaft
+ Brake system
+ Engines
+ Fuel system
+ Ignition system
+ Start system
+ Release system
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. An immobilizer
+ Electric equipment
|
Service out of a workshop
The stabilizer of cross-section stability/plug
Removal
|
|
- Lift the car.
- Remove bolts fixing скобы the stabilizer of cross-section stability (7).
- Remove nuts of the spherical hinge of the stabilizer (6), washers (5) and plugs (4).
- Remove the stabilizer of cross-section stability (2) together with spherical hinges (3).
- Disconnect spherical hinges of the stabilizer (3) from a bar of the stabilizer (2).
|
|
1 — the suspension bracket lever
2 — the stabilizer of cross-section stability
3 — spherical hinges of the stabilizer
4 — the plug
5 — a washer
6 — nuts of the spherical hinge of the stabilizer
7 — bolts fixing скобы the stabilizer of cross-section stability |
|
|
Installation
|
|
For correct installation of a bar of the stabilizer of cross-section stability, on both parties, be convinced that the colour paint (1) on a stabilizer bar is combined with the fixing plug (3) on the right and at the left. |
|
|
1 — the painted part
2 — скоба the fixing plug
3 — the fixing plug |
|
|
- Connect spherical hinges and a stabilizer bar.
- Establish spherical hinges of the stabilizer on operating levers.
|
|
Do not tighten till the end of a nut of the spherical hinge of the stabilizer. |
- Establish скобы the fixing plug of a bar of the stabilizer.
- At stabilizer installation collect all its parts, without tightening them to check up stabilizer centering on the parties. Be convinced that the spherical hinge costs in neutral position at a sight from the top party of a body.
- Tighten bolts скобы the stabilizer and a nut of the spherical hinge of the stabilizer to the specified value of the moment of an inhaling.
|
|
The inhaling moment:
- Nut of the spherical hinge of the stabilizer (a): 26 Н•м (2.6 kg th, 19.0 pounds-foots)
- Nut of the spherical hinge of the stabilizer (b): 50 Н•м (5.0 kg th, 36.5 pounds-foots)
- Bolt скобы the stabilizer (c): 23 Н•м (2.3 kg th, 17.0 pounds-foots)
|
|
|
|
|
