Suzuki Grand Vitara SQ416/SQ420/420WD

Since 1998 of release

Repair and car operation

Suzuka Grandee Vitara
+ The general information
+ Maintenance service and greasing
+ Heater, ventilation and the conditioner
+ Steering
- Suspension bracket
   + Forward suspension bracket
   - Back suspension bracket
      The general description
      - Diagnostics
         The diagnostic table
         Shock-absorber check
         Check of the bottom draught, the top draught, lateral draught
         + Check of the case of the bridge and cylindrical spring
         Check of a stopper of the bearing and internal oil epiploon of the bridge
         Check of a wheel disk, nut and the bearing
      + Service out of a workshop
+ Wheels and tyres
+ Forward приводной a shaft shaft/bearing. An oil epiploon
+ Kardannye shaft
+ Brake system
+ Engines
+ Fuel system
+ Ignition system
+ Start system
+ Release system
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. An immobilizer
+ Electric equipment

Shock-absorber check

PERFORMANCE ORDER

Check up on presence of deformations or damages.
Check up plugs on deterioration or damages.
Check up on presence of signs of leak of oil.
Replace any faulty parts.

At work with the back shock-absorber in which there is a gas under a high pressure, it is necessary to observe following safety measures:

Not to assort the shock-absorber.
Not to place it in fire.
Not to store in its places where it can become hot.
Before recycling it is necessary to drill in it an aperture in a place specified in drawing by an arrow, and to let out gas and oil. For this purpose put the shock-absorber sideways.
Gas in itself is harmless, but at its exit the shaving formed at drilling, therefore necessarily can take off put on goggles.

"And": drill an aperture in diameter about 3 mm (0.12 inches).