Suzuki Grand Vitara SQ416/SQ420/420WD

Since 1998 of release

Repair and car operation


Suzuka Grandee Vitara
+ The general information
+ Maintenance service and greasing
+ Heater, ventilation and the conditioner
+ Steering
- Suspension bracket
   + Forward suspension bracket
   - Back suspension bracket
      The general description
      + Diagnostics
      - Service out of a workshop
         The shock-absorber
         Cylindrical spring
         The bottom draught
         The top draught
         Lateral draught
         The back bridge and the wheel bearing
         Internal oil epiploon of the back bridge
         The case of the back bridge
+ Wheels and tyres
+ Forward приводной a shaft shaft/bearing. An oil epiploon
+ Kardannye shaft
+ Brake system
+ Engines
+ Fuel system
+ Ignition system
+ Start system
+ Release system
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. An immobilizer
+ Electric equipment






e8f2b5b1

Service out of a workshop

The shock-absorber

The shock-absorber is not subject to adjustment, repeated filling and dismantling-assemblage. The unique form of service of the shock-absorber is its replacement when it loses the амортизирующую ability, is damaged or tests liquid leak.

Removal

 PERFORMANCE ORDER

  1. Lift the car and remove a back wheel.
  1. Floor jack (2) prop up the case of the back bridge (1) that it has not fallen.
  1. Remove a counternut (1) (if is available) and a nut of the shock-absorber (2).
  2. Remove the bottom fixing bolt (7).
  3. Remove the shock-absorber (6).
1 — a counternut
2 — a shock-absorber nut
3 — the top support
4 — the rubber plug
5 — the bottom support

Installation

 PERFORMANCE ORDER

  1. Establish the shock-absorber. Drawing see to establish a fixing bolt in a correct direction.
  2. Clean a jack.
  3. Lower the lift.
  4. Tighten nuts to the specified value of the moment of an inhaling.
    • The inhaling moment:
      • Shock-absorber nut (a): 29 Н•м (2.9 kg th, 21.0 pound-foot)
      • Shock-absorber counternut (b): 29 Н•м (2.9 kg th, 21.0 pound-foot)
      • The bottom nut of the shock-absorber (c): 100 Н•м (10.0 kg th. 72.5 pounds-foots)

Tighten the bottom nut when the car is removed from the lift and is in not loaded condition.

The top party


3 — a body outer side

The bottom party

3 — a body outer side