Suzuki Grand Vitara SQ416/SQ420/420WD

Since 1998 of release

Repair and car operation



Suzuka Grandee Vitara
+ The general information
+ Maintenance service and greasing
+ Heater, ventilation and the conditioner
+ Steering
- Suspension bracket
   + Forward suspension bracket
   - Back suspension bracket
      The general description
      - Diagnostics
         The diagnostic table
         Shock-absorber check
         Check of the bottom draught, the top draught, lateral draught
         + Check of the case of the bridge and cylindrical spring
         Check of a stopper of the bearing and internal oil epiploon of the bridge
         Check of a wheel disk, nut and the bearing
      + Service out of a workshop
+ Wheels and tyres
+ Forward приводной a shaft shaft/bearing. An oil epiploon
+ Kardannye shaft
+ Brake system
+ Engines
+ Fuel system
+ Ignition system
+ Start system
+ Release system
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. An immobilizer
+ Electric equipment







e8f2b5b1

Check of a wheel disk, nut and the bearing

 PERFORMANCE ORDER

  1. Check up each wheel disk on presence of dents, deformations and cracks. It is necessary to replace strongly damaged disk.
  1. Check up an inhaling of nuts of a nave of a wheel and, if necessary, tighten to the specified value of the moment of an inhaling. The inhaling moment: a wheel nut (a) — 100 Н•м (10.0 kg th, 72.5 pounds-foots).
  1. Check up wheel bearings on deterioration. To measure люфт, remove from the middle of a wheel a cap and put the device with a dial to the bridge centre. Border люфта the wheel bearing: 0.8 mm (0.03 inches).
  1. If measurement exceeds this border, replace the bearing.
  1. Rotating a wheel, check up the bearing on noise and smoothness of rotation. If defect is found out, replace the bearing.