Suzuka Grandee Vitara
+ The general information
+ Maintenance service and greasing
+ Heater, ventilation and the conditioner
+ Steering
+ Suspension bracket
+ Wheels and tyres
+ Forward приводной a shaft shaft/bearing. An oil epiploon
+ Kardannye shaft
- Brake system
+ Brakes
+ Brake highway/hose the brake cylinder
+ Forward brakes
- Lay and back brake
+ The general description
- Diagnostics
Check and adjustment
Vehicle service
Cable of a lay brake
Brake drum
Brake колодка
The brake cylinder
Back plate of a brake
+ Antiblocking brake system (ABS)
+ Engines
+ Fuel system
+ Ignition system
+ Start system
+ Release system
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. An immobilizer
+ Electric equipment
|
Vehicle service
The lever of a lay brake
Removal
|
|
- Disconnect negative (-) a cable from the battery.
- Stop wheels of a vehicle and release the lever of a lay brake.
- Remove a back central console box.
- Disconnect a wire conclusion of the switch of a lay brake at linking муфты.
- Remove a lock nut of a cable of a lay brake (1).
|
|
1 — a lock nut of a cable of a lay brake
2 — the lever of a lay brake
3 — a brake cable |
|
|
- Remove bolts of the lever of a lay brake (4) and then remove assemblage of the lever of a lay brake (5) from the balance weight (2) and checks (3).
|
- Remove the balance weight from a cable of a lay brake (1).
|
|
Do not assort the switch of the lever of a lay brake. He should be removed and established as the uniform block of the switch. |
|
|
Installation
Installation procedure is the procedure of removal which are carried out upside-down.
|
|
- Check up an angle of slope of the balance weight (2). A balance weight Angle of slope: "a" — within 15 degrees. An inhaling twisting moment: a bolt of the lever of a lay brake (a) — 26 Н•м (2.6 kg th, 19.0 pounds-foots).
|
|
1 — a cable of a lay brake
2 — a balance weight angle of slope
3 — the check
4 — a bolt of the lever of a lay brake
5 — assemblage of the lever of a lay brake |
- After all parts are established, the lever of a lay brake is necessary for adjusting.
- Address to Section Check and adjustment of a lay brake in the Head Brake system.
- Whether check up there is no jamming of a brake drum and whether the brake system correctly works.
|
|
|
|
