Suzuka Grandee Vitara
+ The general information
+ Maintenance service and greasing
+ Heater, ventilation and the conditioner
+ Steering
+ Suspension bracket
+ Wheels and tyres
+ Forward приводной a shaft shaft/bearing. An oil epiploon
+ Kardannye shaft
+ Brake system
+ Engines
+ Fuel system
+ Ignition system
+ Start system
+ Release system
- Transmissions
+ Mechanical transmission (type 1)
+ Mechanical transmission (type 2)
- Automatic transmission (4 A/T)
+ The general description
+ Diagnostics of an automatic transmission
+ Safety measures at diagnostics of malfunctions
+ Visual survey
- Service out of a workshop
Liquid level
Liquid replacement
Hoses of a cooler of oil
Cable of a throttle of an automatic transmission
The manual selector
Gear change cable
The switch (gauge) of a range of transmission
The gauge of speed on an exit of an automatic transmission
The interruption switch on demand
Solenoidal valves
The switch of change of a food \norm
Tubes of a cooler of oil
+ System of blocking of brakes
+ System check
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. An immobilizer
+ Electric equipment
|
The manual selector
Тип-1
Тип-2
Removal (for type-1)
|
|
- Disconnect "minus" a battery cable.
- Remove a console box.
- Disconnect a socket of a lamp of illumination, the solenoid of blocking of switching and the switch of raising transfer.
- Disconnect a cable of blocking from a blocking cam on the lever of a choice of transfer.
- Remove fixing bolts of the lever of a choice of transfer.
- Disconnect a cable of a choice of transfer from the lever of a choice of transfer.
|
|
Removal (for type-2)
|
|
- Disconnect "minus" a battery cable.
- Remove a console box.
- Disconnect a socket of a lamp of illumination, the solenoid of blocking of switching (if is available) and the switch of raising transfer.
- Remove fixing bolts of the lever of a choice of transfer.
- Disconnect a cable of a choice of transfer from an extension piece clip on the transfer lever.
|
|
1 — a cable of a choice of transfer
2 — knot of a manual choice of transfer
3 — a clip of the extension piece of a cable of a choice of transfer |
|
|
Installation (for type-1)
|
|
The new knot of the lever of a choice of transfer of type-1 has a cam of blocking with a hairpin in position of connection of a cable. Remove this hairpin after attach a blocking cable to a cam of blocking and tighten a cable nut. |
|
|
1 — a hairpin of a cam of blocking (only in new knot of a choice of transfer) |
For installation execute removal procedure upside-down, paying attention to the following:
|
|
- Connect the end of a cable of blocking to a cam as it is described in Section the Main cable of blocking.
- Having finished installation, be convinced that the system of blocking of a brake (key) works normally.
|
|
Installation (for type-2)
For installation of knot of a manual choice of transfer execute removal procedure upside-down, paying attention to following instructions:
|
|
- Be convinced that the clip of a cable of a choice of transfer reliably holds a cable of a choice of transfer on knot of a manual choice of transfer.
- Tighten fixing bolts of knot of a manual choice of transfer to the specified value of the moment of an inhaling. The inhaling moment: fixing bolts of knot of a manual choice of transfer — 18 Н•м (1.8 kg th, 13.5 pounds-foots).
|
|
1 — a cable of a choice of transfer
2 — knot of a manual choice of transfer
3 — a clip of the extension piece of a cable of a choice of transfer |
|
|
Check
|
|
Check up the lever of a choice of transfer on smooth and accurate movement, and the position indicator – on correctness of indications. |
|
|
