Suzuki Grand Vitara SQ416/SQ420/420WD

Since 1998 of release

Repair and car operation



Suzuka Grandee Vitara
+ The general information
+ Maintenance service and greasing
+ Heater, ventilation and the conditioner
+ Steering
+ Suspension bracket
+ Wheels and tyres
+ Forward приводной a shaft shaft/bearing. An oil epiploon
+ Kardannye shaft
+ Brake system
+ Engines
+ Fuel system
+ Ignition system
+ Start system
+ Release system
- Transmissions
   + Mechanical transmission (type 1)
   + Mechanical transmission (type 2)
   - Automatic transmission (4 A/T)
      + The general description
      + Diagnostics of an automatic transmission
      + Safety measures at diagnostics of malfunctions
      + Visual survey
      + Service out of a workshop
      + System of blocking of brakes
      - System check
         The main cable of blocking
         Transmission removal (if there is a transfer)
         Installation
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. An immobilizer
+ Electric equipment







e8f2b5b1

System check

 PERFORMANCE ORDER

  1. Check up, that the lever of a choice of transfer did not move from position “P” to any other positions when the key of the switch of ignition is in position “ACC”, “LOCK” (BLOCKING) (or it is taken out from the lock of the switch of ignition) or the brake pedal is not pressed.
  1. Switch the lever of a choice of transfer to position “P”, release the button of the handle and check up the following:
  1. The ignition key can be turned between positions “LOCK” (BLOCKING) and “ACC” in both parties, and it can be pulled out from the ignition switch.
  2. The lever of a choice of transfer can be switched from position “P” in any other position when draught of the solenoid of blocking of switching (or the plate of a manual unblocking) is shifted in the direction specified by an arrow, and the ignition key will turn in position “ACC”.
  3. The lever of a choice of transfer cannot be switched from position “P” in any other position when draught of the solenoid of blocking of switching (or the plate of a manual unblocking) is shifted in the direction specified by an arrow, and the ignition key will turn in position “LOCK” (BLOCKING).
A — Tip-1
In — Tip-2
1 — a cover
2 — a bolt
3 — draught of the solenoid of blocking of switching (or a plate of a manual unblocking)
4 — the lever of a choice of transfer
5 — the button
3 — draught of the solenoid of blocking of switching (or a plate manual
  1. When the ignition switch will turn in position “ON” (ВКЛ) and the brake pedal is pressed, the lever of a choice of transfer can be switched from position “P” in any other position.
  1. Having switched the lever of a choice of transfer to any position, except “P”, check up, that the ignition key did not turn in position “LOCK” (BLOCKING) and it could not be pulled out from the ignition lock while it is not switched in position “LOCK” (BLOCKING).
1 — (BLOCKING) does not turn between positions «АСС» and «LOCK»