Suzuki Grand Vitara SQ416/SQ420/420WD

Since 1998 of release

Repair and car operation



Suzuka Grandee Vitara
+ The general information
+ Maintenance service and greasing
+ Heater, ventilation and the conditioner
+ Steering
+ Suspension bracket
+ Wheels and tyres
+ Forward приводной a shaft shaft/bearing. An oil epiploon
+ Kardannye shaft
+ Brake system
+ Engines
+ Fuel system
+ Ignition system
+ Start system
+ Release system
+ Transmissions
+ Coupling
+ Transfer
- Forward and back differentials
   - Forward диффренциал
      + The general description
      + Diagnostics
      - Service out of a workshop
         + Servicing
         + Check
         + Removal and installation
         Removal
         Installation
   + Back differential
+ Windows, mirrors, locks and security measures. An immobilizer
+ Electric equipment







e8f2b5b1

Removal

 PERFORMANCE ORDER

  1. Lift the car and merge oil.
  2. Disconnect air hoses a hose сапуна from the differential case.
  3. Before to remove карданный a shaft, put levelling labels on a flange of connection and карданный a shaft.
And — levelling labels
  1. Remove a flange карданного a shaft, having removed 4 its bolts and suspend it on a cord or something similar.

In a case вытаскивания карданного a shaft preliminary it is necessary to merge transfer oil.

  1. Remove 3 bolts of the left fixing arm and 3 bolts of a flange of a power shaft to release a differential left-hand side.
1 — a bolt of a fixing arm
2 — фланцевый a bolt and a nut
  1. Remove 2 bolts of a cross-beam to release back fixture of differential.
1 — bolts
  1. For back fixture втулкового type remove bolts and a back fixing arm.
  2. For back fixture втулкового type remove bolts and a back fixing arm №2.
1 — a back fixing bolt
2 — a bolt of a back fixing arm
3 — a back fixing arm
4 — a bolt of a back fixing arm №2
5 — a back fixing arm №2
  1. Having propped up the case of differential a transmission jack, remove fixing bolts on the right side of the case.
1 — a bolt of a fixing arm
2 — fixing arm R
3 — the differential case
  1. Using two big screw-drivers as levers, pull out the right party of a power shaft from differential and remove the case from the car.

During this work be cautious not to damage a power shaft casing.


1 — connection of power shaft R
2 — the differential case
3 — a transmission jack
4 — a screw-driver