Suzuki Grand Vitara SQ416/SQ420/420WD

Since 1998 of release

Repair and car operation



Suzuka Grandee Vitara
+ The general information
+ Maintenance service and greasing
+ Heater, ventilation and the conditioner
- Steering
   + Suspension bracket, wheels and tyres
   + Adjustment of corners of installation of wheels of a forward suspension bracket
   + System of the hydraulic booster of a wheel
   - Steering wheel and steering column
      - Steering wheel and steering column the safety not equipped with a pillow
         The general description
         + Diagnostics
         - Service out of a workshop
            Steering wheel
            Podrulevye switches
            Steering column (at not a cabriolet)
            The top shaft of a steering (at not a cabriolet)
            Steering column (at a cabriolet)
            The steering lock (the ignition switch)
            The bottom shaft of a steering
            Check of a steering column on presence of damages at failure (at a cabriolet)
            Check of a steering column and the top shaft of a steering on presence of damages at failure (at not "cabriolet")
            The lever of an adjustable unblocking of a steering column
         Specifications of the moment of an inhaling
         The special tool
      + Steering wheel and steering column with a safety pillow
+ Suspension bracket
+ Wheels and tyres
+ Forward приводной a shaft shaft/bearing. An oil epiploon
+ Kardannye shaft
+ Brake system
+ Engines
+ Fuel system
+ Ignition system
+ Start system
+ Release system
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. An immobilizer
+ Electric equipment







e8f2b5b1

The bottom shaft of a steering

Removal

 PERFORMANCE ORDER

  1. Turn a steering wheel so that forward wheels of the car have been directed directly forward.
  2. Turn the ignition switch in position “LOCK” and take out a key.
  3. Put levelling labels (3) on муфту a shaft (2) and a shaft (on the party of the top shaft or on the column party) that on them correctly to establish into place.
1 — the top shaft or a steering column
2 — муфта a steering shaft
3 — labels
  1. Having removed a bolt (4) with муфты a shaft from outside the top shaft or a column and having weakened a bolt (5) from outside the bottom shaft, pull муфту a shaft (2) towards the bottom shaft (as shown arrows).
1 — the top shaft or a steering column
2 — муфта a shaft
3 — the bottom steering shaft
4 — a bolt from outside the top shaft
5 — a bolt from outside the bottom shaft
  1. Put levelling labels on bottom муфту bottom a shaft an and шестеренчатый a shaft that on them correctly to establish.
  2. Remove a bolt (2) bottom муфты the bottom shaft, then remove the bottom shaft.
  1. Remove a bolt муфты a shaft (from outside the bottom shaft) with муфты a shaft, then remove муфту a shaft (3) from the bottom shaft (1).

Installation

 PERFORMANCE ORDER

  1. Be convinced that forward wheels and a steering wheel are directed directly forward.
  1. Combine a flat part “A” the bottom shaft with an aperture for a bolt “B” муфты a shaft (2). Then insert муфту a shaft into the bottom shaft.
  1. Establish a bolt муфты a shaft (from outside the bottom shaft) on муфту a shaft. Tighten manually.
  2. Insert шестеренчатый a shaft in bottom муфту the bottom shaft, having combined the labels put preliminary. Then establish a bolt (2) bottom муфты the bottom shaft on bottom муфту the bottom shaft. Tighten to the specified value of the moment of an inhaling. The inhaling moment: a bolt bottom муфты the bottom shaft — 25 Н•м (2.5 kg th, 18.0 pounds-foots).

1 — assemblage of the bottom steering shaft
2 — a bolt
3 — муфта a steering shaft

  1. Establish муфту a steering shaft (2) on a steering shaft, having combined the labels (3) put before removal.
1 — the top shaft or a steering column
2 — муфта a steering shaft
3 — labels

Be convinced that forward wheels and a steering wheel are directed directly forward.


  1. Establish a bolt муфты a shaft (from outside the top shaft or a column) (2) on муфту a shaft (1). At first tighten a bolt муфты a shaft (from outside columns) (3) to the specified value of the moment of an inhaling, and then a bolt муфты a shaft (from outside the bottom shaft) to the specified value of the moment of an inhaling. The inhaling moment: a bolt муфты a shaft (b): 25 Н•м (2.5 kg th, 18.0 pounds-foots).