Suzuki Grand Vitara SQ416/SQ420/420WD

Since 1998 of release

Repair and car operation

Suzuka Grandee Vitara
+ The general information
+ Maintenance service and greasing
+ Heater, ventilation and the conditioner
+ Steering
+ Suspension bracket
+ Wheels and tyres
+ Forward приводной a shaft shaft/bearing. An oil epiploon
+ Kardannye shaft
+ Brake system
+ Engines
+ Fuel system
+ Ignition system
+ Start system
+ Release system
- Transmissions
   + Mechanical transmission (type 1)
   + Mechanical transmission (type 2)
   - Automatic transmission (4 A/T)
      + The general description
      + Diagnostics of an automatic transmission
      + Safety measures at diagnostics of malfunctions
      + Visual survey
      - Service out of a workshop
         Liquid level
         Liquid replacement
         Hoses of a cooler of oil
         Cable of a throttle of an automatic transmission
         The manual selector
         Gear change cable
         The switch (gauge) of a range of transmission
         The gauge of speed on an exit of an automatic transmission
         The interruption switch on demand
         Solenoidal valves
         The switch of change of a food \norm
         Tubes of a cooler of oil
      + System of blocking of brakes
      + System check
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. An immobilizer
+ Electric equipment


The switch (gauge) of a range of transmission

Check and adjustment


  1. Switch the choice lever in position “N”.
  2. Check up, that the central line on a shaft of the manual valve has been levelled with a zero line “N” on the switch. If they are not levelled, ослабьте a bolt of the switch and level lines.
  3. Check up, that the engine was got in position “N” and “P”, and not got in position “D”, “2”, “L” or “R”. Also check up, that in position “R” backing headlights joined.
  4. If failure condition does not manage to be eliminated by adjustment, disconnect сцепку the switch of position of transmission and check up contact presence, switching the lever of a choice of transfer, as shown in the table.

1 — a zero line “N”
2 — the central line on a shaft of the manual valve