Suzuka Grandee Vitara
+ The general information
+ Maintenance service and greasing
+ Heater, ventilation and the conditioner
+ Suspension bracket
+ Wheels and tyres
+ Forward приводной a shaft shaft/bearing. An oil epiploon
+ Kardannye shaft
+ Brake system
+ Fuel system
+ Ignition system
+ Start system
+ Release system
- Forward and back differentials
- Forward диффренциал
+ The general description
- Service out of a workshop
Control system of a full drive
The air pump
+ Removal and installation
+ Back differential
+ Windows, mirrors, locks and security measures. An immobilizer
+ Electric equipment
- Disconnect a hose for air from the pump and establish on a hose the special tool. Ослабьте an adjusting bolt on the special tool. The special tool (A): 09918-18110.
- Attach an air hose of the compressor to the special tool. Start up air and turn an adjusting bolt to receive the specified pressure. The specified pressure: 30.0 кПа (0.3 kg/sm2, 4.25 pounds on sq. inch).
Do not lift pressure above 200 кПа (2.0 kg/sm2, 28.4фунта on sq. inch) as it can damage a diaphragm.
||1 — the differential case
2 — an adjusting bolt
3 — to air compressor
- Lift the car so that forward wheels did not concern the earths, turn one forward wheel a hand and check up other wheel which should behave as follows:
- When pressure from the compressor arrives to the actuator: the second forward wheel should turn in a direction opposite to volume in which you rotated the first wheel a hand.
- When pressure from the compressor does not arrive to the actuator: the second forward wheel should remain motionless whereas the wheel which rotated a hand, should rotate.
- If result unsatisfactory, check up differential as it is described in the Head Forward and back differentials, in Section Check (the module Repair manual).