Suzuka Grandee Vitara
+ The general information
+ Maintenance service and greasing
+ Heater, ventilation and the conditioner
- Steering
+ Suspension bracket, wheels and tyres
+ Adjustment of corners of installation of wheels of a forward suspension bracket
+ System of the hydraulic booster of a wheel
- Steering wheel and steering column
+ Steering wheel and steering column the safety not equipped with a pillow
- Steering wheel and steering column with a safety pillow
The general description
+ Diagnostics
- Service out of a workshop
+ Safety measures at service
The module (having inflated) pillows of the driver
+ Steering wheel
The contact coil and подрулевые switches
Steering column (at not a cabriolet)
The top shaft of a steering (at not a cabriolet)
Steering column (at a cabriolet)
The steering lock (the ignition switch)
The bottom shaft of a steering
Check of a steering column and the top shaft of a steering on presence of damages at failure (at not a cabriolet)
Check of a steering column on damages at failure (at a cabriolet)
The lever of an adjustable unblocking of a steering column
Specifications of the moment of an inhaling
The special tool
+ Suspension bracket
+ Wheels and tyres
+ Forward приводной a shaft shaft/bearing. An oil epiploon
+ Kardannye shaft
+ Brake system
+ Engines
+ Fuel system
+ Ignition system
+ Start system
+ Release system
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. An immobilizer
+ Electric equipment
|
The contact coil and подрулевые switches
|
Do not turn the contact coil (on подрулевых switches) on more, than the admissible number of turns (about two and a half a turn from the central position on and counter-clockwise accordingly), differently the coil will break. |
Removal
|
- Remove a steering wheel from a steering column. See in the given Chapter Has undressed the Steering wheel.
- Uncover apertures of a steering column (1).
- Remove bolts (1) covers of a steering column (3 pieces).
- Divide the top cover (2) and the bottom cover (3), then remove them.
- Disconnect all cables of the contact coil and подрулевых switches.
|
A — Not a cabriolet B — the Cabriolet |
- Remove the contact coil and подрулевые switches (1) from a steering column.
Not a cabriolet
Cabriolet
|
1 — the contact coil and подрулевые switches
2 — a bolt |
- Check up wires of the contact coil and подрулевых switches on presence оплавления or other damages. If damages are found out, it is necessary to replace wires.
|
A — Not a cabriolet B — the Cabriolet 1 — the contact coil and подрулевые switches |
|
|
Installation
|
- Be convinced that forward wheels of the car are directed directly forward, and the ignition switch is in position “LOCK”.
- Establish the contact coil and подрулевые switches on a steering column.
|
The new contact coil and подрулевые switches is completed by a set of the coil and kept in the central position by a lock pin and a sealant. Having established the contact coil and подрулевые switches on a steering column, remove this lock pin. |
|
A — Not a cabriolet B — the Cabriolet 1 — a sealant (if is available, remove a lock pin after installation of the contact coil and подрулевых switches) 2 — a lock pin (if is available, remove a lock pin after installation of the contact coil and подрулевых switches) |
- Connect all cables disconnected at removal.
- Establish top (2) and the bottom (3) covers of a steering column, then tighten bolts (1) covers of a steering column.
|
At installation of the top and bottom covers pay attention to that between them wires of the contact coil and подрулевых switches have not got. |
|
A — Not a cabriolet B — the Cabriolet * — A standard bolt ** — A bolt-samorez |
- Establish a cover of an aperture of a steering column (1).
- Establish a steering wheel on a steering column. See in the given Chapter Has undressed the Steering wheel.
Not a cabriolet
|
1 — a cover of an aperture of a steering column |
Cabriolet
|
1 — a cover of an aperture of a steering column |
|
|
|
|