Suzuka Grandee Vitara
+ The general information
+ Maintenance service and greasing
+ Heater, ventilation and the conditioner
- Steering
+ Suspension bracket, wheels and tyres
+ Adjustment of corners of installation of wheels of a forward suspension bracket
+ System of the hydraulic booster of a wheel
- Steering wheel and steering column
+ Steering wheel and steering column the safety not equipped with a pillow
- Steering wheel and steering column with a safety pillow
The general description
+ Diagnostics
- Service out of a workshop
+ Safety measures at service
The module (having inflated) pillows of the driver
+ Steering wheel
The contact coil and подрулевые switches
Steering column (at not a cabriolet)
The top shaft of a steering (at not a cabriolet)
Steering column (at a cabriolet)
The steering lock (the ignition switch)
The bottom shaft of a steering
Check of a steering column and the top shaft of a steering on presence of damages at failure (at not a cabriolet)
Check of a steering column on damages at failure (at a cabriolet)
The lever of an adjustable unblocking of a steering column
Specifications of the moment of an inhaling
The special tool
+ Suspension bracket
+ Wheels and tyres
+ Forward приводной a shaft shaft/bearing. An oil epiploon
+ Kardannye shaft
+ Brake system
+ Engines
+ Fuel system
+ Ignition system
+ Start system
+ Release system
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. An immobilizer
+ Electric equipment
|
The steering lock (the ignition switch)
Removal
|
|
- Remove a steering column (1). Sections the Steering column (at not a cabriolet) and the Steering column (at a cabriolet) See in the given Chapter.
|
|
- With the help центрового the puncher (1), ослабьте also remove fixing bolts (2) steering locks.
|
|
|
Be cautious not to damage the puncher aluminium parts of the steering lock. |
- Turn the ignition key in position “ACC” or “ON” and remove the steering lock from a steering column.
|
|
Installation
|
|
- Arrange an oblong aperture of a steering shaft (2) in the middle of an aperture in a column.
- Turn the ignition key in position “ACC” or “ON” and will put the steering lock on a column
- Now turn the ignition key in position “LOCK” and take out from the lock.
- Combine the plug of the lock with an oblong aperture of a steering shaft and повращайте a shaft to be convinced that it is blocked.
|
|
- Tighten new bolts until at them heads will not be broken off.
|
- Turn the ignition key in position “ACC” or “ON” and check up that the steering shaft rotates smoothly. Also check up lock work.
- Establish a steering column as it is described in the given Chapter in Sections the Steering column (at not a cabriolet) and the Steering column (at a cabriolet).
|
|
|
|
