Suzuki Grand Vitara SQ416/SQ420/420WD

Since 1998 of release

Repair and car operation



Suzuka Grandee Vitara
+ The general information
+ Maintenance service and greasing
+ Heater, ventilation and the conditioner
+ Steering
+ Suspension bracket
+ Wheels and tyres
+ Forward приводной a shaft shaft/bearing. An oil epiploon
+ Kardannye shaft
+ Brake system
+ Engines
+ Fuel system
+ Ignition system
+ Start system
+ Release system
- Transmissions
   - Mechanical transmission (type 1)
      The system description
      Diagnostics
      - Service out of a workshop
         Oil for a transmission
         The gear change lever
         The illumination switch
         Back fixture of the engine
         Transmission removal
         Transmission installation
         The case-extension piece (for model with a drive on two wheels and engine G16 and J20)
         Oil epiploon of the case-extension piece (for model with a drive on two wheels and engine G16 and J20)
   + Mechanical transmission (type 2)
   + Automatic transmission (4 A/T)
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. An immobilizer
+ Electric equipment







e8f2b5b1

The case-extension piece (for model with a drive on two wheels and engine G16 and J20)

Dismantling

 PERFORMANCE ORDER

  1. Remove an oil epiploon as it is described in the given section, in Section the Oil epiploon of the case-extension piece (for model with a drive on two wheels and engine G16 and J20).
  2. Remove bolts of a returnable spring (2), and then springs (3 and 4) and directing pins (5).
  3. Remove the gauge of speed (6).

Assemblage

 PERFORMANCE ORDER

  1. Establish an oil epiploon as it is described in the given Chapter in Section the Oil epiploon of the case-extension piece (for model with a drive on two wheels and engine G16 and J20).
  1. After greasing drawing establish directing pins (5), returnable springs (3 and 4) and bolts of returnable springs (2) and tighten to the specified value of the moment of an inhaling. After installation check up that each pin moves smoothly. “A”: greasing 99000-25010. The inhaling moment (a): 23 Н•м (2.3 kg th, 17.0 pounds-foots).
  1. Establish the speedometer gauge on the case-extension piece (1).